SRX 2.0 Specification

OSCAR Recommendation, 7 April 2008

[2011-07-01 – This document is reproduced with permission of the Localization Industry Standards Association. All emendations to the original text are indicated by striking through the original text and inserting new text in red bold face in square brackets.]

[Note: This document introduces no technical changes to the SRX Standard with respect to the versions published on the LISA Website. All changes relate to locations of files on the Internet and to copyright licences.]

This version:

http://www.lisa.org/fileadmin/standards/srx20.html [http://www.ttt.org/oscarStandards/srx/srx20.html]

[Latest version:

[http://www.ttt.org/oscarStandards/srx/]

Previous version:

http://www.lisa.org/fileadmin/standards/srx10.html [http://www.ttt.org/oscarStandards/srx/srx10.html]

Editors:

David Pooley <dpooley@sdl.com>
Rodolfo M. Raya <rmraya@maxprograms.com>
[arle.lommel@gmail.com> (for post-LISA porting tasks only)]


[The following changes to the copyright and license agreement are made with the permission of the LISA Board and Director as part of dissolution proceedings for the Localization Industry Standards Association.

This document is made available by the Localization Industry Standards Association [LISA] under the terms of the Creative Commons Attribution 3.0 Unported (CC BY 3.0) license:

License Summary

Visit http://creativecommons.org/licenses/by/3.0/ for full license details.


You are free:

  • to Share — to copy, distribute and transmit the work
  • to Remix — to adapt the work
  • to make commercial use of the work

Under the following conditions:

  • Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).

With the understanding that:

  • Waiver — Any of the above conditions can be waived if you get permission from the copyright holder.
  • Public Domain — Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  • Other Rights — In no way are any of the following rights affected by the license:
    • Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations;
    • The author's moral rights;
    • Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.

Copyright © The Localization Industry Standards Association [LISA] 2006-2008. All Rights Reserved.

This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to LISA.

The limited permissions granted above are perpetual and will not be revoked by LISA or its successors or assigns.

[All inquiries concerning rights not addressed in the emended license agreement above should be sent to Mr. Micheal Anobile at micheal_anobile@yahoo.com.]


Abstract

This document defines the Segmentation Rules eXchange format (SRX). The purpose of the SRX format is to provide a standard method to describe segmentation rules that are being exchanged among tools and/or translation vendors.

Status of this document

This document is the current official recommendation from OSCAR for the SRX format. Comments may be sent to tmx_imp@lists.lisa-open.org.

Table of Contents


Abstract

Status of this document

1. Introduction
1.1. XML Compliance
1.2. Regular Expressions
1.2.1. Metacharacters
1.2.2. Operators

2. General structure
2.1. Language rules
2.2. Map rules
2.3. Example document

3. Detailed Specifications
3.1. Elements
3.2. Attributes

4. Implementation notes

5. Changes Since Previous Version (Non-Normative)
5.1. Backwards Compatibility

Appendices
A. References
B. Sample Document
C. Examples of Segmentation
D. XML Schema for SRX


1. Introduction

SRX defines an XML vocabulary for describing the rules used for breaking a text document into smaller fragments -or segments- suitable for translation.

SRX complements the TMX standard so that translation memory (TM) data that is exchanged between applications can be used more effectively. Having the segmentation rules that were used when a TM was created increases the leverage that can be achieved when deploying the TM data. SRX does not, however, address the following procedural issues, which would cause loss of leverage when TMX data is deployed in another environment:

  • The use of segmentation rules that are different from those that were originally used to create the TM data

  • TM data that was generated using a variety of segmentation rules

SRX is defined in two parts:

  • A specification of the segmentation rules that are applicable for each language. This is represented by the <languagerules> element.

  • A specification of how the segmentation rules are applied to each language. This is represented by the <maprules> element.

1.1. XML Compliance

SRX is XML-compliant. SRX files are "well-formed" XML documents that can be processed without explicit reference to the SRX schema. However, a "valid" SRX file must conform to the SRX schema, and any suspicious SRX file should be verified against the SRX schema using a validating XML parser.

Since XML syntax is case sensitive, any XML application must define casing conventions. All elements and attributes names of SRX are defined in lowercase.

The SRX namespace is defined as "http://www.lisa.org/srx20". The following XML sample includes the SRX namespace definition.

   <?xml version="1.0"?>
   <myformat>
      <data>
         <srx xmlns="http://www.lisa.org/srx20" version="2.0">
           ... SRX data ...
         </srx>
      </data>
   </myformat>

1.2. Regular Expressions

The segmentation rules themselves are represented using regular expressions. This allows for maximum flexibility in the definition of the rules. The following definitions are a subset of the current definition for the ICU regular expressions. Applications using other engines will need to adapt this format for use with their own parser.

1.2.1. Metacharacters

Character

Description

\a 

Match a BELL, \u0007 

\A 

Match at the beginning of the input. Differs from ^ in that \A will not match after a new line within the input. 

\b, outside of a [Set] 

Match if the current position is a word boundary. Boundaries occur at the transitions betweem word (\w) and non-word (\W) characters, with combining marks ignored.

\b, within a [Set] 

Match a BACKSPACE, \u0008. 

\B 

Match if the current position is not a word boundary. 

\cX 

Match a control-X character. 

\d 

Match any character with the Unicode General Category of Nd (Number, Decimal Digit.) 

\D 

Match any character that is not a decimal digit. 

\e 

Match an ESCAPE, \u001B. 

\E 

Terminates a \Q ... \E quoted sequence. 

\f 

Match a FORM FEED, \u000C. 

\G 

Match if the current position is at the end of the previous match. 

\n 

Match a LINE FEED, \u000A. 

\N{UNICODE CHARACTER NAME} 

Match the named character. 

\p{UNICODE PROPERTY NAME} 

Match any character with the specified Unicode Property. 

\P{UNICODE PROPERTY NAME} 

Match any character not having the specified Unicode Property. 

\Q 

Quotes all following characters until \E. 

\r 

Match a CARRIAGE RETURN, \u000D. 

\s 

Match a white space character. White space is defined as [\t\n\f\r\p{Z}]. 

\S 

Match a non-white space character. 

\t 

Match a HORIZONTAL TABULATION, \u0009. 

\uhhhh 

Match the character with the hex value hhhh. 

\Uhhhhhhhh 

Match the character with the hex value hhhhhhhh. Exactly eight hex digits must be provided, even though the largest Unicode code point is \U0010ffff. 

\w 

Match a word character. Word characters are [\p{Ll}\p{Lu}\p{Lt}\p{Lo}\p{Nd}]. 

\W 

Match a non-word character. 

\x{hhhh} 

Match the character with hex value hhhh 

\xhh 

Match the character with two digit hex value hh 

\X 

Match a Grapheme Cluster

\Z 

Match if the current position is at the end of input, but before the final line terminator, if one exists. 

\z 

Match if the current position is at the end of input. 

\0nnn 

Match the character with octal value nnn 

\n 

Back Reference. Match whatever the nth capturing group matched. n must be >1 and < total number of capture groups in the pattern 

[pattern] 

Match any one character from the set. See UnicodeSet for a full description of what may appear in the pattern.

Match any character. 

Match at the beginning of a line.  

Match at the end of a line.  

Quotes the following character. Characters that must be quoted to be treated as literals are * ? + [ ( ) { } ^ $ | \ . / 

1.2.2. Operators

The following operators can be used.

Operator 

Description 

Alternation. A|B matches either A or B. 

Match 0 or more times. Match as many times as possible. 

Match 1 or more times. Match as many times as possible. 

Match zero or one times. Prefer one. 

{n} 

Match exactly n times 

{n,} 

Match at least n times. Match as many times as possible. 

{n,m} 

Match between n and m times. Match as many times as possible, but not more than m. 

*? 

Match 0 or more times. Match as few times as possible. 

+? 

Match 1 or more times. Match as few times as possible. 

?? 

Match zero or one times. Prefer zero. 

{n}? 

Match exactly n times 

{n,}? 

Match at least n times, but no more than required for an overall pattern match 

{n,m}? 

Match between n and m times. Match as few times as possible, but not less than n. 

*+ 

Match 0 or more times. Match as many times as possible when first encountered, do not retry with fewer even if overall match fails (Possessive Match) 

++ 

Match 1 or more times. Possessive match. 

?+ 

Match zero or one times. Possessive match. 

{n}+ 

Match exactly n times 

{n,}+ 

Match at least n times. Possessive Match. 

{n,m}+ 

Match between n and m times. Possessive Match. 


2. General structure

An SRX document is enclosed in an <srx> root element. The <srx> element contains two elements: <header> and <body>. The <header> element contains zero, one, two or three <formathandle> elements followed by any number of elements from a foreign namespace. The <body> element contains two elements: <languagerules> and <maprules>.

2.1. Language rules

The <languagerules> element contains information about the segmentation rules for each particular language. It is a collection of <languagerule> elements. Each one of these contains a collection of <rule> elements.

Each <rule> element contains zero or one <beforebreak> element and zero or one <afterbreak> element which provide details of the regular expressions for the rules themselves. The break attribute indicates whether this is a segment break or an exception rule. The rules are applied in the order that they are specified within the <languagerule> element.

Note that this approach is an adaptation of the method described in Unicode Technical Report 29 which covers text boundaries. Readers are encouraged to study this report with particular attention being given to the "sentence boundaries" section. Specifically, when a matching <rule> is found, the application should stop processing at that point and take the action as specified by the break attribute. As such, it is logical for the exceptions to be listed first in the <languagerule> element. The appropriate wording from TR29 is:

"Boundary determination is specified in terms of an ordered list of rules, indicating the status of a boundary position. The rules are numbered for reference and are applied in sequence to determine whether there is a boundary at a given offset. That is, there is an implicit “otherwise” at the front of each rule following the first. The rules are processed from top to bottom. As soon as a rule matches and produces a boundary status (boundary or no boundary) for that offset, the process is terminated."

2.2. Map rules

The <maprules> element contains information as to how each language should be segmented. It is a collection of <languagemap> elements that describe which rules should be used for each language.

2.2.1. Cascading

SRX supports the concept of "cascading" segmentation rules. The cascade attribute must be specified on the <header> element.

During segmentation processing, when a matching <languagemap> element is encountered, all the <rule> elements from the associated <languagerule> element are appended to an ordered list of <rule> elements. If the cascade attribute is set to "no" then aggregation of the <rule> elements will terminate. Once the ordered list of <rule> elements has been created, it is applied to the text to determine the segment boundaries.

2.3. Example document

See the sample document section for an example of a SRX document.


3. Detailed Specifications

3.1. Elements

This section lists the various elements used in the SRX document.

<afterbreak>, <beforebreak>, <body>, <formathandle>, <header>, <languagemap>, <languagerule>, <languagerules>, <maprules>, <rule>, <srx>.


<afterbreak>

After break - The <afterbreak> element encloses a regular expression.

Required attributes:

None.

Optional attributes:

None.

Contents:

A regular expression which represents the text that appears after a segment break.


<beforebreak>

Before break - The <beforebreak> element encloses a regular expression.

Required attributes:

None.

Optional attributes:

None.

Contents:

A regular expression which represents the text that appears before a segment break.


<body>

Body - The <body> element encloses the language rules and language maps that are contained within the file.

Required attributes:

None.

Optional attributes:

None.

Contents:

One <languagerules> element and one <maprules> element.


<formathandle>

Format handling - The <formathandle> element determines how formatting that falls on a segment boundary should be handled. The type attribute determines the type of formatting and the include attribute indicates how this formatting should be handled. As these elements are optional in the <header> element, the following defaults values apply:

 <formathandle type="start"
            include="no"/> <formathandle type="end" include="yes"/>
            <formathandle type="isolated" include="no"/> 

See Implementation notes section for more details.

Required attributes:

type, include

Optional attributes:

None

Contents:

None


Header - The <header> element contains information that is relevant to the whole document.

Required attributes:

segmentsubflows, cascade

Optional attributes:

None

Contents:

Zero, one, two or three <formathandle> elements.
Followed by zero, one or more elements from foreign namespaces.


<languagemap>

Language map - The <languagemap> element maps one or more languages to a language rule.

Required attributes:

languagepattern, languagerulename

Optional attributes:

None

Contents:

None.


<languagerule>

Language rule - The <languagerule> element encloses one instance of language rule data, a set of <rule> elements.

Required attributes:

languagerulename

Optional attributes:

None.

Contents:

One or more <rule> elements.


<languagerules>

Language rules - The <languagerules> element encloses the language rules data, the set of <languagerule> elements.

Required attributes:

None.

Optional attributes:

None.

Contents:

One or more <languagerule> elements.


<maprules>

Map rules - The <maprules> element encloses a set of <languagemap> elements. The order of the <languagemap> elements determines the logical order in which these rules should be applied.

Required attributes:

None.

Optional attributes:

None.

Contents:

One or more <languagemap> elements.


<rule>

Break or exception rule - The <rule> element defines a segmentation rule for a language using the <beforebreak> and <afterbreak> elements. The break attribute determines whether this is a rule that determines a break or an exception. If the break attribute is missing, it is assumed to be a break rule.

Required attributes:

None.

Optional attributes:

break

Contents:

Zero or one <beforebreak> element and zero or one <afterbreak> element.

The <rule> element must contain at least one child element.


<srx>

Root element - The <srx> element is the root element of the document. It encloses the header and body information for the file.

Required attributes:

version

Optional attributes:

None.

Contents:

One <header> element and one <body> element.


3.2. Attributes

This section lists the various attributes used in the SRX elements.

break, include, languagepattern, languagerulename, segmentsubflows, type, version.

break

Break indicator - Specifies whether a rule is a break or an exception.

Value description:

A value of "no" indicates that the rule is an exception rule. A value of "yes" indicates that the rule is a break rule.

Default value:

"yes"

Used in:

<rule>.


cascade

Cascade indicator - Specifies whether mapping rules should be cascaded.

Value description:

A value of "no" indicates that cascading should not be allowed. A value of "yes" indicates that rules should be cascaded. When cascading is not allowed, a matching <languagemap> element terminates the search for a <languagerule> element. When cascading is allowed, all matching <languagemap> elements are used to accumulate the rules from the associated <languagerule> elements.

Default value:

Undefined

Used in:

<header>.


include

Formatting code behaviour - The include attribute indicates whether formatting is included in the segment being created.

Value description:

A value of "no" indicates that the format code does not belong to the segment being created. A value of "yes" indicates that the format code belongs to the segment being created.

Default value:

Undefined

Used in:

<formathandle>.


languagepattern

Language pattern - Identifies a language pattern.

Value description:

Specifies a regular expression for the language codes that map to the given language rule. Language codes are defined as in [RFC 4646].

Default value:

Undefined.

Used in:

<languagemap>.


languagerulename

Language rule name - Specifies a unique name for a language rule.

Value description:

Used to link a language rule between the <languagerule> and <languagemap> elements.

Default value:

Undefined.

Used in:

<languagerule>, <languagemap>.


segmentsubflows

Subflow segmentation behaviour - The segmentsubflows attribute indicates how subflows should be segmented.

Value description:

A value of "no" indicates that subflows within a segment should not be segmented. A value of "yes" indicates that subflows should be segmented according to the rules. A subflow is defined as being a piece of text that appears within another segment but which should be handled separately. For example, in the following HTML snippet:

<p>Click <img
                        src="..\button.gif" alt="Toolbar button. Click to preview."/> to
                        preview the document.</p>

The text "Toolbar button. Click to preview." is a subflow. The segmentsubflows attribute determines whether this text should be segmented according to the rules.

Default value:

"yes"

Used in:

<header>.


type

Formatting code type - The type attribute indicates the type of formatting for which the <formathandle> is being applied.

Value description:

This attribute can have one of three values. These are:

"start" to indicate the start of a pair of formatting codes

"end" to indicate the end of a pair of formatting codes

"isolated" to indicate a format that has no partner

Default value:

Undefined

Used in:

<formathandle>.


version

SRX version - The version attribute indicates the version of the SRX format to which the document conforms.

Value description:

Fixed text: the major version number, a period, and the minor version number. For example: version="2.0".

Default value:

"2.0"

Used in:

<srx>.


4. Implementation notes

This section has been included in order to clarify how the rules should be applied to the text which has been passed for segmentation.

The first task in the sementation process is to build a list of rules to use. The language code of the source document is matched against the regular expressions contained in the languagepattern attribute of all <languagemap> elements. When there is a match, all rules of the corresponding <languagerule> element are added to the list of segmentation rules to use. If the cascade attribute is set to "no", the accumulation process stops after the first match. Otherwise, all <languagemap> elements must be examined.

Assuming that all applicable <rule> elements have already been accumulated into an ordered list, the algorithm described below illustrates exactly where segment boundaries should be detected. The following pseudo-code may not be the most efficient way to implement segmentation, but it fulfills the requirement of this specification.

 
for each inter-character position in the text 
   for each <rule> element in the list 
      if the current  <rule> matches the inter-character position then 
         if the <rule> element specifies a break then 
            break the text at this point 
         end if 
         exit for 
      end if 
   next 
next 
                    

In a sentence such as "The U.K. Prime Minister, Mr. Blair, was seen out with his family today.", there are 70 possible inter-character breakpoints which need to be processed. By placing exceptions for "U.K." and "Mr." in <rule break="no"> elements before the default full stop followed by a space <rule break="yes">, the necessary segmentation for this sentence can be achieved. See Appendix C - Examples of Segmentation for more details.

When the text being segmented contains inline markup, the following situations should be considered:

  1. If a breaking condition happens right after an opening formatting mark, the value of the include attribute of the <formathandle> element with type attribute set to "start" should be examined and one of these actions should be taken:

    • If the value of the include attribute is "yes", the inline markup is included in the segment being closed.

    • If the value of the include attribute is "no" (default behaviour), the segment is terminated before the inline markup and the formatting code is incorporated to the following segment.

  2. If a breaking condition happens right after a closing formatting mark, the value of the include attribute of the <formathandle> element with type attribute set to "end" should be examined and one of these actions should be taken:

    • If the value of the include attribute is "yes" (default behaviour), the inline markup is included in the segment being closed.

    • If the value of the include attribute is "no", the segment is terminated before the inline markup and the formatting code is incorporated to the following segment.

  3. If a breaking condition happens right after an isolated formatting mark, the value of the include attribute of the <formathandle> element with type attribute set to "isolated" should be examined and one of these actions should be taken:

    • If the value of the include attribute is "yes", the inline markup is included in the segment being closed.

    • If the value of the include attribute is "no" (default behaviour), the segment is terminated before the inline markup and the formatting code is incorporated to the following segment.


5. Changes Since Previous Version (Non-Normative)

The main changes in this version (2.0) relative to the previous version (1.0) are as follows:

5.1. Backwards Compatibility

SRX 2.0 is not compatible with previous version of SRX.

SRX 2.0 has introduced a new attribute which determines how language rules are aggregated (the cascade attribute on the <header> element). In previous versions of the standard, cascading behaviour was undefined which meant that implementations of the same SRX rules could vary between applications. Also please note that this version of the specification includes an Implementation notes section which clarifies how the rules should be applied to a block of text.

The element <maprule> has been removed to avoid potential differences in implementations, as SRX 1.0 didn't contain processing instructions for this element.

All existing implementations of SRX 1.0 will need to be adapted to support this new version of the specification.


A. References

[Unicode Character Database 5.0.0]

Unicode Character Database 5.0.0 . Unicode Organisation, July 2006.

[RFC 4646]

RFC 4646 Tags for Identifying Languages . IETF (Internet Engineering Task Force), September 2006.

[XML 1.0]

Extensible Markup Language (XML) 1.0 Second Edition . W3C (World Wide Web Consortium), September 2006.

[ICU Regular Expressions]

ICU Regular Expressions User Guide . IBM and Others, December 2006.

[Unicode Technical Report 29]

Unicode Standard Annex #29: Text Boundaries , Unicode Consortium, October 2006.


B. Sample Document

In this example of an SRX document indentations are added for ease of reading, and the different types of notation are mixed to illustrate the various possibilities.

<?xml version="1.0"?>
<srx version="2.0" 
	xmlns="http://www.lisa.org/srx20"
	xsi:schemaLocation="http://www.lisa.org/srx20 srx20.xsd"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <header segmentsubflows="yes" cascade="yes">
        <formathandle type="start" include="no"/>
        <formathandle type="end" include="yes"/>
        <formathandle type="isolated" include="yes"/>
    </header>
    <body>
        <languagerules>
            <languagerule languagerulename="Default">
                <!-- Common rules for most languages -->
                <rule break="no">
                    <beforebreak>^\s*[0-9]+\.</beforebreak>
                    <afterbreak>\s</afterbreak>
                </rule>
                <rule break="yes">
                    <afterbreak>\n</afterbreak>
                </rule>
                <rule break="yes">
                    <beforebreak>[\.\?!]+</beforebreak>
                    <afterbreak>\s</afterbreak>
                </rule>
            </languagerule>
            <languagerule languagerulename="English">
                <!-- Some English abbreviations -->
                <rule break="no">
                    <beforebreak>\s[Ee][Tt][Cc]\.</beforebreak>
                    <afterbreak>\s[a-z]</afterbreak>
                </rule>
                <rule break="no">
                    <beforebreak>\sMr\.</beforebreak>
                    <afterbreak>\s</afterbreak>
                </rule>
                <rule break="no">
                    <beforebreak>\sU\.K\.</beforebreak>
                    <afterbreak>\s</afterbreak>
                </rule>
            </languagerule>
            <languagerule languagerulename="French">
                <!-- Some French abbreviations -->
                <rule break="no">
                    <beforebreak>\s[Mm]lle\.</beforebreak>
                    <afterbreak>\s</afterbreak>
                </rule>
                <rule break="no">
                    <beforebreak>\s[Mm]lles\.</beforebreak>
                    <afterbreak>\s</afterbreak>
                </rule>
                <rule break="no">
                    <beforebreak>\s[Mm]me\.</beforebreak>
                    <afterbreak>\s</afterbreak>
                </rule>
                <rule break="no">
                    <beforebreak>\s[Mm]mes\.</beforebreak>
                    <afterbreak>\s</afterbreak>
                </rule>
            </languagerule>
            <languagerule languagerulename="Japanese">
                <!-- Rules for breaking on Japanese punctuation
                
                \xff61: Halfwidth ideographic full stop
                \x3002: Ideographic full stop
                \xff0e: Fullwidth full stop
                \xff1f: Fullwidth question mark
                \xff01: Fullwidth exclamation mark
                -->
                <rule break="yes">
                    <beforebreak>[\xff61\x3002\xff0e\xff1f\xff01]+</beforebreak>
                    <afterbreak></afterbreak>
                </rule>
            </languagerule>
        </languagerules>
        <maprules>
            <!-- List exceptions first -->
            <languagemap languagepattern="[Ee][Nn].*" languagerulename="English"/>
            <languagemap languagepattern="[Ff][Rr].*" languagerulename="French"/>
            <!-- Japanese breaking rules -->
            <languagemap languagepattern="[Jj][Aa].*" languagerulename="Japanese"/>
            <!-- Common breaking rules -->
            <languagemap languagepattern=".*" languagerulename="Default"/>
        </maprules>
    </body>
</srx>


C. Examples of Segmentation

This section provides some examples of how segmentation rules might be applied to fragments of text. These are simple examples and are by no means a complete reference to segmentation.

Rule set

Text to segment

Result

Notes

 <rule
                        break"yes">
                        <beforebreak>[\.\?!]+</beforebreak>
                        <afterbreak>\s</afterbreak>
                        </rule> 

The U.K. Prime Minister, Mr. Blair, was seen out with his family today.

(1) The U.K.
(2) Prime Minister, Mr.
(3) Blair, was seen out with his family today

The simple full-stop followed by a space rule here showing its limitations

 <rule
                        break="no">
                        <beforebreak>\sU\.K\.</beforebreak>
                        <afterbreak>\s</afterbreak>
                        </rule> <rule break="yes">
                        <beforebreak>[\.\?!]+</beforebreak>
                        <afterbreak>\s</afterbreak>
                        </rule> 

The U.K. Prime Minister, Mr. Blair, was seen out with his family today.

(1) The U.K. Prime Minister, Mr.
(2) Blair, was seen out with his family today

Partially corrected with an exception for "U.K."

 <rule
                        break="no">
                        <beforebreak>\sU\.K\.</beforebreak>
                        <afterbreak>\s</afterbreak>
                        </rule> <rule break="no">
                        <beforebreak>Mr.</beforebreak>
                        <afterbreak>\s</afterbreak>
                        </rule> <rule break="yes">
                        <beforebreak>[\.\?!]+</beforebreak>
                        <afterbreak>\s</afterbreak>
                        </rule> 

The U.K. Prime Minister, Mr. Blair, was seen out with his family today.

(1) The U.K. Prime Minister, Mr. Blair, was seen out with his family today

Sufficient exceptions to prevent segmentation on "U.K." and "Mr."


D. XML Schema for SRX

    <?xml version="1.0" encoding="UTF-8"?>
    
    <!--
        Document        : srx20.xsd
        Version             : 2.0
        Created on      : December 26, 2006
        Authors            : dpooley@sdl.com   rmraya@maxprograms.com
        Description     : This XML Schema defines the structure of SRX 2.0
        Status               : OSCAR recommendation
        
        Copyright © The Localisation Industry Standards Association [LISA] 2006. 
        All Rights Reserved.
    -->
    
    <!-- 
        
        History of modifications (latest first):
        
        Jul-08-2008 by RMR: made foreign elements optional in <header>
        Jan-13-2008 by RMR: Permitted elements from foreign namespaces in <header> element
        Dec-26-2006 by RMR: Fixed namespace handling
        Changed version to "2.0"
        Removed "cascade" attribute from <languagemap>
        Removed <maprule> element
        Adjusted attributes to match the specification document    
        Jun-21-2006 by DRP: Change version number to "1.2" in readiness to move to "2.0"
        Make the cascade attribute mandatory (required) on the <header> element
        Add enumerations where necessary and some brief documentation for elements and attributes
        Jun-15-2006 by DRP: Change version number to "1.1" in readiness to move to "2.0"
        Mar-10-2006 by DRP: Add "cascade" attribute to <header>, <maprule> and <languagemap> elements
        Apr-21-2004 by DRP: Convert to version 1.0.
        Mar-22-2004 by DRP: Eighth draft version.
        Ensure the <excludeexception> element is removed
        Update version number
        Mar-17-2004 by DRP: Seventh draft version.
        Remove <exceptions>, <exception>, <endrules>, <endrule> and <excludeexception> elements
        Add <rule> element
        Update version number
        Feb-02-2004 by DRP: Sixth draft version.
        Update version number
        Oct-27-2003 by DRP: Fifth draft version.
        Removed includeformatting attribute from <header> element
        Added <formathandle> element to the <header>
        Removed priority attribute from <endrule> and <exception> elements
        Added name attribute to <exception> element
        Added <excludeexception> element to the <endrule> element
        Oct-10-2003 by DRP: Fourth draft version.
        Removed <classdefinitions> and <classdefinition> elements
        Removed classdefinitionname attribute
        Removed <digitcharacters>, <whitespacecharacters> and <wordcharacters>
        Added priority attribute to <endrule> and <exception> elements
        Added includeformatting attribute to <header> element
        Jul-24-2003 by DRP: Third draft version.
        Removed <charsets> and <charset> to be replaced with <classdefinitions> and <classdefinition>
        Renamed <digits> to <digitcharacters>
        Renamed <whitespace> to <whitespacecharacters>
        Renamed <wordchars> to <wordcharacters>
        <digitcharacters>, <whitespacecharacters> and <wordcharacters> are now optional
        Renamed <langrules> to <languagerules>
        Renamed <langrule> to <languagerule>
        Renamed <langmap> to <languagemap>
        Renamed langrulename to languagerulename
        Renamed langpattern to languagepattern
        Jun-19-2003 by DRP: Second draft version.
        Removed the <codepage> element.
        Added <header> and <body> elements.
        Nov-22-2002 by DRP: First draft version
        
    -->
    <xs:schema xmlns:srx="http://www.lisa.org/srx20" 
        targetNamespace="http://www.lisa.org/srx20" xml:lang="en" 
        xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
        <xs:import namespace="http://www.w3.org/XML/1998/namespace"
            schemaLocation="http://www.w3.org/2001/xml.xsd"/>
        <xs:element name="afterbreak">
            <xs:annotation>
                <xs:documentation>Contains the regular expression to match before the segment
                    break</xs:documentation>
            </xs:annotation>
            <xs:complexType mixed="true"/>
        </xs:element>
        <xs:element name="beforebreak">
            <xs:annotation>
                <xs:documentation>Contains the regular expression to match after the segment
                    break</xs:documentation>
            </xs:annotation>
            <xs:complexType mixed="true"/>
        </xs:element>
        <xs:element name="body">
            <xs:annotation>
                <xs:documentation>SRX body</xs:documentation>
            </xs:annotation>
            <xs:complexType>
                <xs:sequence>
                    <xs:element ref="srx:languagerules"/>
                    <xs:element ref="srx:maprules"/>
                </xs:sequence>
            </xs:complexType>
        </xs:element>
        <xs:element name="formathandle">
            <xs:annotation>
                <xs:documentation>Determines which side of the segment break that formatting
                    information goes</xs:documentation>
            </xs:annotation>
            <xs:complexType>
                <xs:attribute name="include" use="required">
                    <xs:annotation>
                        <xs:documentation>A value of "no" indicates that the format code does not belong
                            to the segment being created. A value of "yes" indicates that the format code
                            belongs to the segment being created.</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                        <xs:restriction base="xs:string">
                            <xs:enumeration value="yes"/>
                            <xs:enumeration value="no"/>
                        </xs:restriction>
                    </xs:simpleType>
                </xs:attribute>
                <xs:attribute name="type" use="required">
                    <xs:annotation>
                        <xs:documentation>The type of format for which behaviour is being defined. Can be
                            "start", "end" or "isolated".</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                        <xs:restriction base="xs:string">
                            <xs:enumeration value="start"/>
                            <xs:enumeration value="end"/>
                            <xs:enumeration value="isolated"/>
                        </xs:restriction>
                    </xs:simpleType>
                </xs:attribute>
            </xs:complexType>
        </xs:element>
        <xs:element name="header">
            <xs:annotation>
                <xs:documentation>SRX header</xs:documentation>
            </xs:annotation>
            <xs:complexType>
                <xs:sequence>
                    <xs:element ref="srx:formathandle" minOccurs="0" maxOccurs="3"/>
                    <xs:any minOccurs="0" maxOccurs="unbounded" namespace="##other" processContents="lax"/>
                </xs:sequence>
                <xs:attribute name="segmentsubflows" use="required">
                    <xs:annotation>
                        <xs:documentation>Determines whether text subflows should be
                            segmented</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                        <xs:restriction base="xs:string">
                            <xs:enumeration value="yes"/>
                            <xs:enumeration value="no"/>
                        </xs:restriction>
                    </xs:simpleType>
                </xs:attribute>
                <xs:attribute name="cascade" use="required">
                    <xs:annotation>
                        <xs:documentation>Determines whether a matching &lt;languagemap&gt; element
                            should terminate the search</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                        <xs:restriction base="xs:string">
                            <xs:enumeration value="yes"/>
                            <xs:enumeration value="no"/>
                        </xs:restriction>
                    </xs:simpleType>
                </xs:attribute>
            </xs:complexType>
        </xs:element>
        <xs:element name="languagemap">
            <xs:annotation>
                <xs:documentation>Maps one or more languages to a set of rules</xs:documentation>
            </xs:annotation>
            <xs:complexType>
                <xs:attribute name="languagerulename" type="xs:string" use="required">
                    <xs:annotation>
                        <xs:documentation>The name of the language rule to use when the languagepattern
                            regular expression is satisfied</xs:documentation>
                    </xs:annotation>
                </xs:attribute>
                <xs:attribute name="languagepattern" type="xs:string" use="required">
                    <xs:annotation>
                        <xs:documentation>The regular expression pattern match for the language
                            code</xs:documentation>
                    </xs:annotation>
                </xs:attribute>
            </xs:complexType>
        </xs:element>
        <xs:element name="languagerule">
            <xs:annotation>
                <xs:documentation>A set of rules for a logical set of languages</xs:documentation>
            </xs:annotation>
            <xs:complexType>
                <xs:sequence>
                    <xs:element ref="srx:rule" minOccurs="1" maxOccurs="unbounded"/>
                </xs:sequence>
                <xs:attribute name="languagerulename" type="xs:string" use="required">
                    <xs:annotation>
                        <xs:documentation>The name of the language rule</xs:documentation>
                    </xs:annotation>
                </xs:attribute>
            </xs:complexType>
        </xs:element>
        <xs:element name="languagerules">
            <xs:annotation>
                <xs:documentation>Contains all the logical sets of rules</xs:documentation>
            </xs:annotation>
            <xs:complexType>
                <xs:sequence>
                    <xs:element ref="srx:languagerule" minOccurs="1" maxOccurs="unbounded"/>
                </xs:sequence>
            </xs:complexType>
        </xs:element>
        <xs:element name="maprules">
            <xs:annotation>
                <xs:documentation>A set of language maps</xs:documentation>
            </xs:annotation>
            <xs:complexType>
                <xs:sequence>
                    <xs:element ref="srx:languagemap" minOccurs="1" maxOccurs="unbounded"/>
                </xs:sequence>
            </xs:complexType>
        </xs:element>
        <xs:element name="rule">
            <xs:annotation>
                <xs:documentation>A break/no break rule</xs:documentation>
            </xs:annotation>
            <xs:complexType>
                <xs:sequence>
                    <xs:element ref="srx:beforebreak" minOccurs="0"/>
                    <xs:element ref="srx:afterbreak" minOccurs="0"/>
                </xs:sequence>
                <xs:attribute name="break">
                    <xs:annotation>
                        <xs:documentation>Determines whether this is a segment break or an exception
                            rule</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                        <xs:restriction base="xs:string">
                            <xs:enumeration value="yes"/>
                            <xs:enumeration value="no"/>
                        </xs:restriction>
                    </xs:simpleType>
                </xs:attribute>
            </xs:complexType>
        </xs:element>
        <xs:element name="srx">
            <xs:annotation>
                <xs:documentation>OSCAR Segmentation Rules eXchange</xs:documentation>
            </xs:annotation>
            <xs:complexType>
                <xs:sequence>
                    <xs:element ref="srx:header"/>
                    <xs:element ref="srx:body"/>
                </xs:sequence>
                <xs:attribute name="version" use="required">
                    <xs:annotation>
                        <xs:documentation>The version of SRX</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                        <xs:restriction base="xs:string">
                            <xs:enumeration value="2.0"/>
                        </xs:restriction>
                    </xs:simpleType>
                </xs:attribute>
            </xs:complexType>
        </xs:element>
    </xs:schema>